Rear lamps
Please note: This page describes the legal situation in Germany (StVZO/StVO). UN ECE regulations apply internationally; national regulations in your country may differ.
Technical requirements, mounting regulations and test standards for rear lamps (tail lights) on trucks according to StVZO and ECE R7.
Function of rear lamps
Rear lamps (tail lights) are the red, steadily lit lamps at the rear of the vehicle that indicate the presence and width of the vehicle to other road users in the dark or in poor visibility.
They are required by law and switch on together with the front position lamps, the side marker lamps and the registration plate lighting. Unlike the stop lamp, they are permanently lit (not flashing) and have a lower intensity.
Technical requirements
| Parameter | Requirement |
|---|---|
| Light colour | Red |
| Test standard | ECE R7 (category R / R2) |
| Minimum illuminating surface | ≥ 20 cm² |
| Number | At least 2 (one on each side) |
| Mounting height (min.) | 350 mm |
| Mounting height (max.) | 1500 mm (up to 2100 mm in technical exceptions) |
| Lateral distance | Max. 400 mm from the outer edge |
| Viewing angle | 45° inwards, 80° outwards |
| Switching | Together with headlamps / position lamps |
Combination lamps
Rear lamp unit
Modern trucks have rear lamp units that combine rear light, stop light, direction indicator and rear fog lamp in one housing. These must accordingly bear several ECE approval marks.
LED retrofit kits
Compact LED rear lamps are available for retrofitting and can be used to replace conventional bulb lamps. They offer greater brightness, longer service life and lower power consumption.
Trailer lighting
When towing a trailer, its rear lamps must also meet the requirements. Wiring is via the standardised 7-pin or 13-pin connector (ISO 1185).
Questions about rear lamps for your truck? We will be happy to advise you.
+49 (0) 6550 979 969-0