Position lamps
Please note: This page describes the legal situation in Germany (StVZO/StVO). UN ECE regulations apply internationally; national regulations in your country may differ.
Regulations, mounting requirements and minimum technical requirements for position lamps on trucks according to StVZO § 51 and ECE R7.
What are position lamps?
Position lamps are lamps that indicate the width of a vehicle to other road users. They are mounted on the outer sides of the vehicle, emitting light to the front (white) and to the rear (red).
Position lamps are mandatory on trucks more than 2.10 m wide. They supplement the headlamps and rear lamps by making the lateral width of the vehicle clearly recognisable even in the dark.
Technical requirements
| Feature | Requirement |
|---|---|
| Light colour front | White |
| Light colour rear | Red |
| Test standard | ECE R7 (E approval mark) |
| Minimum illuminating surface | ≥ 10 cm² |
| Mounting height (min.) | 350 mm above the road surface |
| Mounting height (max.) | 1500 mm (up to 2100 mm permitted) |
| Lateral distance | Max. 400 mm from the outer edge |
| Number per side | Min. 1 front (white), 1 rear (red) |
| Switching | Together with rear and registration plate lamps |
Mounting regulations
Position on the vehicle
Position lamps must be mounted as close as possible to the outer edges. The maximum distance from the widest point of the vehicle is 400 mm.
Height above the road surface
Minimum 350 mm, maximum 1500 mm (in exceptional cases up to 2100 mm on vehicles whose body does not allow lower mounting). The lamps must be mounted symmetrically.
Switching
Position lamps switch on together with the rear lamps and the registration plate lighting. They are permanently lit – no flashing, no variable brightness.
Approval mark and approval
Every position lamp must bear the ECE approval mark according to ECE R7. The approval mark consists of a circle with the letter "E" and the country code as well as an approval number. For Germany this is "E1".
LED position lamps are permitted provided they meet the requirements of ECE R7. Compared with conventional bulbs, LED technology offers advantages in terms of service life, power consumption and shock resistance – ideal for the tough operating conditions of trucks.
Questions about position lamps? We will be happy to advise you.
+49 (0) 6550 979 969-0