Requirements for winter service vehicles
Please note: This page describes the legal situation in Germany (StVZO/StVO). UN ECE regulations apply internationally; national regulations in your country may differ.
Snow clearing and gritting vehicles are subject to special regulations for warning lamps, safety markings and lighting. An overview of all requirements under the StVZO and the fact sheet for winter service vehicles (VkBl. 1996 p. 528).
What counts as a winter service vehicle?
Winter service vehicles are all snow clearing equipment and gritting vehicles with permanently integrated clearing or gritting equipment that have been built specifically for this purpose and can only be used in this way. This also includes vehicles converted for winter service by optionally attaching snow clearing or gritting equipment.
In addition to the general regulations of the StVZO, this group of vehicles is subject to the fact sheet for winter service vehicles (VkBl. 1996 p. 528), which lays down special requirements for marking and lighting.
1. Marking of the vehicle
| Requirement | Requirement |
|---|---|
| Warning beacon | One or more lamps for amber flashing light according to § 52 (4) no. 1 StVZO |
| Safety marking | According to DIN 30 710 |
| Warning flag (optional) | White-red-white, 500 × 500 mm, stripe ratio 1:2:1, permitted as lateral outer boundary |
| Horizontal visibility | 360° |
| Vertical visibility | At least 8° upwards; downwards, the viewing angle must reach the road surface no later than 20 m in front of the vehicle outline |
| Several warning beacons | Permitted if at least one lamp always remains visible in the prescribed range |
2. Lighting
Headlamps
If the snow clearing equipment even partially obscures the prescribed headlamps (§ 50 (2) StVZO), additional headlamps mounted higher up are required. Only one pair of headlamps may be switched on at a time. If the mounting height exceeds 1000 mm, special adjustment regulations apply to dipped and main beam (§ 50 (5) and (6) StVZO).
Work light
Permitted under § 52 (7) StVZO. They may only be switched on during the actual work (snow clearing, gritting) and must be aligned so that other road users are not dazzled.
Position lamps
In the event of technical difficulties, mounting heights of up to 2100 mm are permitted (§ 51 (3) StVZO). An exemption permit can be applied for greater heights.
Other lighting
All other prescribed lamps must be correctly fitted, always ready for use and must not be removable. If they are obscured by the snow clearing equipment, equivalent replacement lamps must be fitted.
3. Special requirements for side snowploughs
If a side snowplough projects laterally beyond the vehicle outline, the front and rear must be marked and lit as follows, depending on the working or transport position. All lamps may be no more than 400 mm from the vehicle outline (incl. plough); as an alternative to the rear and position lamp, an end-outline marker lamp (white to the front, red to the rear) is permitted.
| Projection ≤ 2.90 m | Working position | Transport position |
|---|---|---|
| Rear | Rear lamp, red non-triangular retro-reflector, illuminated safety marking (at least 4 standard areas, DIN 30 710), amber flashing lamp cat. 2, illumination of the marking by work lights | Rear lamp, red non-triangular retro-reflector, safety marking (at least 4 standard areas), amber flashing lamp must be inactive |
| Front | Position lamp, white-red-white warning flag | Position lamp, white-red-white warning flag |
4. Speed & other regulations
Shortened road illumination
In accordance with § 3 StVO, speed must always be adapted to visibility and weather conditions and chosen so that the vehicle can stop within the visible distance – especially if road illumination is shortened by high-mounted headlamps.
Condition of the vehicles
According to §§ 30, 30c and 32 StVZO, clearing and gritting equipment must be built and fitted in such a way that normal operation in traffic does not endanger, obstruct or inconvenience anyone – including any attachment parts remaining after removal.
Safe driving of the vehicle
According to § 35b StVZO, clearing or gritting equipment must not impair safe driving of the vehicle; the driver must retain an adequate field of vision.
Registration plate
According to § 60 StVZO, the registration plate must not be obscured – if this is unavoidable, it must be repeated elsewhere.
Questions about warning beacons, safety markings or lighting for winter service vehicles? We will be happy to advise you.
+49 (0) 6550 979 969-0