Daytime running lamps
Please note: This page describes the legal situation in Germany (StVZO/StVO). UN ECE regulations apply internationally; national regulations in your country may differ.
Obligation, function and technical requirements for daytime running lamps on trucks – everything about ECE R87, StVZO § 49a and automatic switching logic.
What are daytime running lamps?
Daytime running lamps (DRL) are forward-facing white lamps that switch on automatically as soon as the engine is started and are lit instead of the main headlamps when ambient light is sufficient. Their purpose is to improve the visibility of the vehicle during the day.
For new vehicle types of categories M1 (passenger cars) and N1, daytime running lamps have been mandatory since 2011 (type approval) and 2012 (first registration). For vehicles of categories N2 and N3 (trucks over 3.5 t and 12 t), the obligation applies from 2012 (type approval) and 2013 (first registration).
Technical requirements (ECE R87)
| Parameter | Requirement |
|---|---|
| Light colour | White |
| Test standard | ECE R87 (E approval mark) |
| Minimum luminous intensity | 400 cd (in the main direction of emission) |
| Maximum luminous intensity | 1200 cd (to avoid glare) |
| Number | 2 (one left and one right, symmetrical) |
| Mounting height (min.) | 250 mm |
| Mounting height (max.) | 1500 mm |
| Distance from outer edge | Max. 400 mm from the outermost vehicle width |
| Automatic dimming | To 50 % or off when dipped beam is switched on |
| Automatic switch-off | When the direction indicator is activated (on that side) |
Switching logic and interaction
Automatic switch-on
Daytime running lamps switch on automatically when the engine is started. They switch off when the engine is switched off. Manual switch-off is not provided for (except in conjunction with the dipped beam being switched on).
Indicator interaction
As soon as a direction indicator is activated, the daytime running lamp on that side switches off for the duration of the flashing. This ensures that the indicator remains clearly visible.
Headlamp interaction
When the dipped beam is switched on, daytime running lamps are automatically switched off or dimmed to 50 %. This prevents unnecessary dazzling of oncoming traffic when the lighting system is activated.
Retrofitting older trucks
Older trucks registered before daytime running lamps became mandatory may be retrofitted with daytime running lamps. These must comply with ECE R87 and bear the corresponding E approval mark.
When retrofitting, particular attention must be paid to the correct switching logic: the daytime running lamps must switch on automatically with the engine and switch off or dim when the dipped beam is switched on. Control units for correct switching are available.
Questions about daytime running lamps for your truck? We will be happy to advise you.
+49 (0) 6550 979 969-0